Home/Capabilities/CNC Turning
TURN
CNC Turning
Turned parts finished in fewer operations — the Lynx puts milled features on while the part is still in the chuck, and the big Milltronics handles work up to 27 inches over the bed.
Specifications
- Lathes
- 7 — five CNC / ProtoTRAK, two manual
- Largest swing
- 27 in (Milltronics ML26)
- Longest
- 60 in between centers (Jet 1660) · 45 in (TRAK TRL 1745S)
- Turning center
- Doosan Lynx 220 LSYA — live tooling, Y-axis, sub-spindle
- Bar work
- To 2 in through the Lynx spindle
- Routine tolerance
- ±0.001″ · ±0.0005″ common
- Lot size
- One-off through production — the Lynx's sub-spindle is built for repeat runs
What we make
- Shafts, pins, spacers and bushings
- Threaded components and adapters
- Sealing surfaces and precision bores
- Turned-and-milled parts finished in one setup on the Lynx
- Large-diameter work on the ML26
On the floor
The machines
- Doosan Lynx 220 LSYA turning center · live tooling · Y-axis · sub-spindle · 2 in bar · 11.8 in max turn dia
- Milltronics ML26 CNC toolroom lathe · 27 in swing
- Milltronics ML18 CNC toolroom lathe · 19 in swing · 8-position turret
- TRAK TRL 1745S ProtoTRAK lathe · 17 in swing · 45 in between centers
- TRAK TRL 1440P Sport ProtoTRAK lathe · 14 in swing · 40 in between centers
- Jet 1660 manual engine lathe · 16 in swing · 60 in between centers
- Clausing manual lathe for small work
Common questions
CNC Turning
Does live tooling actually save me money?
Usually. Milled flats, cross-holes and keyways go on while the part is still gripped, and the sub-spindle finishes the back side without anyone touching it. Fewer setups means less labor and less stack-up error between features.
What is the largest diameter you can turn?
The Milltronics ML26 swings 27 inches over the bed. For length, the Jet 1660 takes 60 inches between centers and the TRAK 1745S takes 45. Call with your part dimensions and we will tell you straight away whether it fits.
Request a Quote
Send a print. Get a real number back.
A dimensioned drawing — the tolerances live there — and the STEP model if the part has any complexity. Tell us the quantity — per release and per year if it repeats — the material and when you need it. Production program? Say so and we quote at volume. Urgent job? Call after you submit.